home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC Gamer (Italian) 22
/
PC Gamer IT CD 22.iso
/
TWINDEMO
/
LBA2
/
DRIVERS
/
MSSDRVR.LST
< prev
next >
Wrap
File List
|
1997-05-28
|
18KB
|
710 lines
;████████████████████████████████████████████████████████████████████████████
;██ ██
;██ Miles Design Audio Interface Library ██
;██ ██
;██ Sound driver installation message file ██
;██ ██
;██ Default selection criteria/examples: ██
;██ ██
;██ .E BLASTER ........ Environment var 'BLASTER' must be present ██
;██ .C MVSOUND ........ CONFIG.SYS must contain 'MVSOUND' string ██
;██ .A AWEUTIL ........ AUTOEXEC.BAT must contain 'AWEUTIL' string ██
;██ ██
;██ .NE BLASTER ....... Environment var 'BLASTER' must NOT be present ██
;██ .NC MVSOUND ....... CONFIG.SYS must NOT contain 'MVSOUND' string ██
;██ .NA AWEUTIL ....... AUTOEXEC.BAT must NOT contain 'AWEUTIL' string ██
;██ .ND .............. Entry cannot be selected as default ██
;██ ██
;██ .T1 .............. Optional BLASTER Tn, if present, must be 1|3 ██
;██ .T2 .............. Mandatory BLASTER Tn must be 2|4|5 ██
;██ .T3 .............. Mandatory BLASTER Tn must be >=6 ██
;██ ██
;██ I/O default derivation: ██
;██ ██
;██ .IOB .............. Derive I/O defaults from BLASTER variable ██
;██ .IOD .............. I/O defaults = first driver default entry ██
;██ .ION .............. Do not allow manual I/O configuration at all ██
;██ ██
;██ .IOA .............. Use I/O address only (must appear at end) ██
;██ .IOL .............. Suppress high-DMA prompt (must appear at end) ██
;██ ██
;████████████████████████████████████████████████████████████████████████████
;████████████████████████████████████████████████████████████████████████████
; Loran was here!
[NO_DIG]
.ND
.ION
.SPECIAL_TEXT
No digital audio with this choice.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[iwav.dig]
;
;Selected by default if autoexec contains IWINIT
;
;Default I/O parms from driver
;
.E INTERWAVE
.IOD
.NAME
InterWave (TM) Digital Audio
.SPECIAL_TEXT
Select this driver for use with any InterWave (TM) Audio Processor based
sound card. Examples of such cards are the Core Dynamic Dynasonix, the
Reveal WaveExtreme 32, and the STB SoundRage 32 sound cards. Some models
of Compaq and Gateway 2000 personal computers also use the InterWave
Audio Processor, check with your manufacturer for more information.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[nvdig.dig]
;
;Selected by default if config.sys contains nvidia
;
;Default I/O parms from driver
;
.C NVINIT
.ION
.SPECIAL_TEXT
Select this driver if your system is equipped with an NVidia-compatible
multimedia accelerator. If the driver fails to detect your card
correctly, contact your board or system vendor for updated drivers.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[proaudio.dig]
;
;Selected by default if CONFIG.SYS contains MVSOUND string
;
;No configuration allowed
;
.C MVSOUND.SYS
.ION
.SPECIAL_TEXT
Stereo digital audio with all versions of the Media Vision Pro Audio
Spectrum is available through the use of this driver. If you experience
problems, you should select the Sound Blaster-compatible driver instead.
The Media Vision utility MVSOUND.SYS must be loaded into memory, or
your card will not be detected.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[ultra.dig]
;
;Selected by default if environment contains ULTRASND variable
;
;Default I/O parms from driver
;
.E ULTRASND
.IOD
.SPECIAL_TEXT
When using this driver, ensure that no Gravis utilities such as SBOS,
UltraMID, or Mega-Em are active. Your UltraSound system software
should be version 2.0 or later.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sndscape.dig]
;
;Selected by default if environment contains SNDSCAPE variable
;
;Default I/O parms from driver
;
.E SNDSCAPE
.IOD
.NAME
Ensoniq SoundScape(TM) Digital Audio
.SPECIAL_TEXT
Select this driver if you have an Ensoniq SoundScape(TM) or compatible
audio card.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sndsys.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.NAME
Microsoft(R) Windows(TM) Sound System or 100% compatible
.SPECIAL_TEXT
Select this driver if your card is compatible with the Microsoft Windows
Sound System.
If DMA channel 1 is not available for use by the Windows Sound System
board, you will need to use the "Skip auto-detection and configure driver
manually" option to select another DMA channel. If you are running
Windows 95 or another Plug-n-Play system, you may need to check with the
Device Manager to see what I/O address your Windows Sound System card is
using.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[adrv688.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.NAME
ESS Technology ES688 Digital Audio
.SPECIAL_TEXT
This driver supports systems equipped with ESS Technology's ES688
chipset.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[jammer.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.NAME
New Media Corporation WaveJammer(TM) Digital Audio
.SPECIAL_TEXT
The WaveJammer card from New Media Corporation provides high-quality
portable audio for PCMCIA-based computers. Select the Ad Lib(R) Music
Synthesizer Card driver for FM music performance with the WaveJammer.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sb16.dig]
;
;Selected by default if BLASTER variable is of type T6
;
;Default I/O parms from BLASTER (I/O address only)
;
.E BLASTER
.T3
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOA
.SPECIAL_TEXT
For high-quality digital audio with your Sound Blaster 16 or AWE32
adapter, select this driver.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbpro.dig]
;
;Selected by default if BLASTER variable is of type T2, T4, or T5
;and no other "clone" variable exists
;
;Default I/O parms from BLASTER
;
.E BLASTER
.T2
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOL
.SPECIAL_TEXT
This driver supports all versions of the Sound Blaster Pro and
100%%-compatible adapters. Not recommended for use with the Sound
Blaster 16 or AWE32.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sblaster.dig]
;
;Selected by default if BLASTER variable is of type T1 or T3 (or no T
;specifier), and no other "clone" variable exists (ULTRASND, MVSOUND, etc.)
;
;Default I/O parms from BLASTER
;
.E BLASTER
.T1
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOL
.SPECIAL_TEXT
Select this driver for use with your Sound Blaster, Sound Galaxy,
Thunderboard, or Pro Audio Spectrum adapter. Other sound cards which
are not supported directly may also work with this driver, as long as
they provide hardware-based Sound Blaster compatibility without emulation
drivers or TSRs.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[rap10.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.HIGH_DMA_PAIRS
.SPECIAL_TEXT
WARNING: During auto-detection of the Roland RAP-10 card, the driver
verifies that the RAP-10 is present at an I/O address of 320H or 330H.
It will NOT verify the card's DMA channel or IRQ settings. If your
RAP-10 card is not configured for IRQ 9, or if DMA channels 5 and 6
are already in use by another card on your system, you MUST select
the "Skip auto-detection and configure driver manually" option at
the next menu, and enter the correct I/O settings for your card.
Otherwise, your system may lock up, or you may experience a rapid
'chatter' effect during sound playback.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[audiodrv.dig]
;
;Never selected by default
;
;Default I/O parms from driver
;
.ND
.IOD
.NAME
ESS AudioDrive
.SPECIAL_TEXT
This driver supports systems equipped with an ESS AudioDrive chipset.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
;████████████████████████████████████████████████████████████████████████████
; Loran was here!
[NO_MDI]
.ND
.ION
.SPECIAL_TEXT
No MIDI music with this choice.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[iwav.mdi]
;
;Selected by default if autoexec contains IWINIT
;
;Default I/O parms from driver
;
.E INTERWAVE
.IOD
.NAME
InterWave (TM) General MIDI
.SPECIAL_TEXT
Select this driver for use with any InterWave (TM) Audio Processor based
sound card. Examples of such cards are the Core Dynamic Dynasonix, the
Reveal WaveExtreme 32, and the STB SoundRage 32 sound cards. Some models
of Compaq and Gateway 2000 personal computers also use the InterWave
Audio Processor, check with your manufacturer for more information.
If you have configuration difficulties, select the Roland MPU-401 driver.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[nvmpu.mdi]
;
;Selected by default if config.sys contains nvidia
;
;Default I/O parms from driver
;
.C NVINIT
.ION
.SPECIAL_TEXT
Select this driver if your system is equipped with an NVidia-compatible
multimedia accelerator. If the driver fails to detect your card
correctly, contact your board or system vendor for updated drivers.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sndscape.mdi]
;
;Selected by default if environment contains SNDSCAPE variable
;
;Default I/O parms from driver
;
.E SNDSCAPE
.IOD
.NAME
Ensoniq SoundScape(TM) General MIDI
.SPECIAL_TEXT
Select this driver if you have an Ensoniq SoundScape(TM) or compatible
audio card.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[ultra.mdi]
;
;Selected by default if environment contains ULTRASND variable
;
;Default I/O parms from driver
;
.E ULTRASND
.IOD
.SPECIAL_TEXT
When using this driver, ensure that no Gravis utilities such as SBOS,
UltraMID, or Mega-Em are active. Your UltraSound system software
should be version 2.0 or later.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbawe32.mdi]
;
;Selected by default if AUTOEXEC contains AWEUTIL string
;
;Default I/O parms from driver
;
.A AWEUTIL
.IOD
.NAME
Creative Labs AWE-32(TM) General MIDI
.SPECIAL_TEXT
This driver offers wavetable-quality General MIDI music synthesis with the
Creative Labs AWE-32 card. The "Creative Labs Sound Blaster 16 or AWE32"
driver should be selected for digital audio.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbpro2.mdi]
;
;Selected by default if BLASTER variable is of type T6 or >, and AUTOEXEC does
;not contain AWEUTIL string
;
;Default I/O parms from BLASTER (A only)
;
.E BLASTER
.T3
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.NA AWEUTIL
.IOB
.IOA
.NAME
Creative Labs Sound Blaster(TM) 16
.SPECIAL_TEXT
This driver is designed for use with Sound Blaster 16 adapters which
are not equipped with General MIDI daughterboards such as the Wave
Blaster.
Although the AWE-32 can also be supported with the Sound Blaster 16
driver, AWE-32 users should select the "Creative Labs AWE-32(TM)
General MIDI" driver for optimum sound quality.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbpro2.mdi]
;
;Selected by default if BLASTER variable is of type T2, T4, or T5,
;no other "clone" variable exists, and inp(388) == 0x00
;
;Default I/O parms from BLASTER (A only)
;
.E BLASTER
.T2
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOA
.SPECIAL_TEXT
If your Sound Blaster Pro is a "current" model equipped with the Yamaha
OPL-3 synthesizer, or if your music doesn't sound right with the other
Sound Blaster Pro driver, you should select this option.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[sbpro1.mdi]
;
;Selected by default if BLASTER variable is of type T2, T4, or T5,
;no other "clone" variable exists, and inp(388) == 0x06
;
;Default I/O parms from BLASTER (A only)
;
.E BLASTER
.T2
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.IOB
.IOA
.SPECIAL_TEXT
Users of early versions of the Sound Blaster Pro card can enjoy
18-voice, 2-operator FM stereo music by selecting this driver.
However, most Sound Blaster Pro cards and their compatibles, including
the Sound Blaster 16, use the more powerful OPL-3 chipset. With these
later cards, you should select the "Creative Labs Sound Blaster
Pro(TM) (new version)" driver instead.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[pasplus.mdi]
;
;Selected by default if MVSOUND exists in CONFIG.SYS, and inp(388) == 0x00
;
;No configuration allowed
;
.C MVSOUND.SYS
.ION
.SPECIAL_TEXT
Users of the Media Vision Pro Audio Spectrum Plus and Pro Audio Spectrum
16 cards should select this driver. The Media Vision utility MVSOUND.SYS
must be loaded into memory, or your card will not be detected.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[adlibg.mdi]
;
;Selected by default if GOLD variable exists in AUTOEXEC.BAT
;
;Default I/O parms from driver
;
.E GOLD
.IOD
.SPECIAL_TEXT
This driver supports the Ad Lib Gold Music Synthesizer card in 4-operator
FM mode.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[opl3.mdi]
;
;Never selected by default
;
;No configuration -- always at $388
;
;.ND
.ION
.SPECIAL_TEXT
This driver is for use with all Yamaha OPL-3 based FM music synthesizers,
including those not supported by any other driver in the list.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[mpu401.mdi]
;
;Never selected by default
;
;Default I/O parms from driver
;
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.NA AWEUTIL
.ND
.IOD
.SPECIAL_TEXT
Most General MIDI synthesizers support the Roland MPU-401 MIDI hardware
interface standard. These include the Roland Sound Canvas, RAP-10,
and compatibles, as well as add-on daughterboards for the Sound Blaster
16 family. MPU-401 devices generally offer the highest level of
performance and sound quality available, but users of Adaptec SCSI
controllers may wish to select the "Skip auto-detection and configure
driver manually" option at the next menu to reduce the likelihood of
MPU-401 detection problems. If you have a Creative Labs AWE-32, you
should select "Creative Labs AWE-32(TM) General MIDI" instead.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[mpu401.mdi]
;
;Never selected by default
;
;Default I/O parms from driver
;
.NAME
Yamaha WaveForce(TM) DB50-XG General MIDI
.NE ULTRASND
.NE SNDSCAPE
.NC MVSOUND.SYS
.NA AWEUTIL
.ND
.IOD
.SPECIAL_TEXT
Select this driver if your Creative Labs Sound Blaster(TM) series card is
equipped with Yamaha's General MIDI/XG daughterboard upgrade.
Users of Adaptec SCSI controllers may wish to select the "Skip
auto-detection and configure driver manually" option at the next menu
to reduce the likelihood of MPU-401 detection problems.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[esfm.mdi]
;
;Never selected by default
;
;Configuration from driver
;
.ND
.IOD
.NAME
ESS Technology ES1688, ES1788, ES1888 Enhanced FM Audio
.SPECIAL_TEXT
This driver supports systems equipped with ESS Technology's ES1688,
ES1788, or ES1888 chips. Enhanced FM music performance is available with
this driver. If problems occur, select the 'ESS Technology ES688 FM
Audio' driver instead.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████
[opl3.mdi]
;
;Never selected by default
;
;No configuration -- always at $388
;
.ND
.ION
.NAME
ESS Technology ES688 FM Audio
.SPECIAL_TEXT
This driver supports systems equipped with ESS Technology's ES688
chipset.
.END_SPECIAL_TEXT
;████████████████████████████████████████████████████████████████████████████